e23da7a1de
Skip height-related ambisonic channels for 2D rendering
2016-03-25 19:57:25 -07:00
05dace6525
Mix Dedicated effects to the real output if possible
2016-03-25 14:47:30 -07:00
3148986184
Implement AL_EXT_STEREO_ANGLES support
2016-03-25 14:40:44 -07:00
19b130c45d
Use the "decoder" config section instead of "ambisonics"
2016-03-25 13:55:23 -07:00
b0acfa1763
Add a cast and a couple float type fixes
2016-03-24 11:11:17 -07:00
3646cf817c
Trace the HQ decoder order
2016-03-23 16:00:07 -07:00
2847590d45
Simplify setting a custom channel map configuration
2016-03-23 15:11:33 -07:00
147274f165
Up-sample first-order content when using a higher order HQ decoder
2016-03-23 15:10:59 -07:00
0dc35784db
Allow second-order HQ decoding
...
Could really do with some optimizations to the mixing gain calculations. For
ambisonic targets, the coefficients will only have 1 non-0 entry for each
output, so the double loop in unnecessarily wasteful. Similarly, most uses
won't need a full height encoding either, so a horizontal-only or mixed-order
target could reduce the number of channels.
2016-03-23 10:39:14 -07:00
713ac9e679
Add a specific output for first-order sources
2016-03-22 17:52:20 -07:00
0a03596af1
Simplify setting the matrix coeffs
2016-03-22 14:42:53 -07:00
3877545d8c
Add a workaround for a buggy modff
2016-03-18 14:05:45 -07:00
ce575718ef
Store the effect's output buffer in the effect state
2016-03-17 10:10:26 -07:00
606402fff0
Make sure enough reverb panning gains are defined
2016-03-16 08:51:12 -07:00
55ff0c143e
Rename the BFormat channels to Aux
2016-03-16 06:49:35 -07:00
a3863d5834
Add config options to enable the hq ambisonic decoder
2016-03-16 01:36:57 -07:00
8ff4a54356
Properly handle negative matrix values and fix decoder initialization
2016-03-15 09:07:03 -07:00
3a26d853ba
Replace the custom layout options with an ambdec loader
...
The ambisonic layout options were never very good for clarity or flexibility.
Hopefully using ambdec files will prove to be better.
2016-03-15 08:00:03 -07:00
23bce59c66
Rename a couple functions for more informative logging
2016-03-15 07:07:09 -07:00
53fadf5497
Add a dual-band ambisonic decoder
...
This uses a virtual B-Format buffer for mixing, and then uses a dual-band
decoder for improved positional quality. This currently only works with first-
order output since first-order input (from the AL_EXT_BFROMAT extension) would
not sound correct when fed through a second- or third-order decoder.
This also does not currently implement near-field compensation since near-field
rendering effects are not implemented.
2016-03-15 05:08:05 -07:00
64cb21cb9f
Downgrade some ERRs to WARNs or TRACEs
2016-03-15 04:02:25 -07:00
066df88a2c
Always mix to the real output for DirectChannels
2016-03-14 20:25:36 -07:00
919b35295e
Add a loader for ambdec files
2016-03-14 20:13:50 -07:00
0220404a91
Use second-order coefficients for 5.1
...
Since the panning only drives 5 speakers, it shouldn't use more than 5
ambisonic channels (9 total in second order, minus 4 for unused height).
2016-03-13 03:32:32 -07:00
0c4653085c
Don't request a specific HRTF when one isn't specified
2016-03-11 21:01:32 -08:00
22abaa287d
Use the real output's left and right channels with HRTF
2016-03-11 20:59:12 -08:00
5328972193
Separate writing to the output buffer from HRTF filtering
2016-03-11 20:44:05 -08:00
bb03fe227b
Update the current HRTF delays if the stepping is not finished
2016-03-11 19:59:14 -08:00
859cc703e7
Use the proper left and right channels for UHJ output
2016-03-10 22:56:44 -08:00
d648486bcd
Generalize GetChannelIdxByName
2016-03-10 14:29:44 -08:00
da5f75615b
Allocate enough reverb panning gains
2016-03-10 01:45:30 -08:00
effb9d1e35
Keep track of the real output's channel names
2016-03-10 01:04:28 -08:00
a457157516
Organize the dry buffer properties into a struct
2016-03-09 23:43:57 -08:00
3e2672ec9f
Track the virtual and real output buffers ecplicitly
2016-03-09 22:57:38 -08:00
3b9fe27cbe
Browse with the current or default device already selected
2016-03-06 12:03:36 -08:00
6971e86847
Add a simple About page that shows the library build version
2016-03-06 02:02:37 -08:00
101ae7644e
Add a couple helpers for dealing with name-pair lists
2016-03-06 01:50:49 -08:00
58aa1751c3
Handle the stereo panning option dynamically
2016-03-05 19:20:38 -08:00
1ca45fa3eb
Use the correct index for finding an empty string
2016-03-05 16:45:10 -08:00
4e3fdf9f5d
Fix reverb with UHJ encoding
2016-03-03 01:41:42 -08:00
457c34c189
Add a backend tab page for JACK options
2016-03-02 23:18:07 -08:00
d169fd859d
Use the clicked() signal for the Browse buttons
2016-03-02 15:43:51 -08:00
773e2846e7
Add a Wave Writer backend config page
2016-03-02 15:31:14 -08:00
71d927333f
Add OSS and Solaris config pages
2016-03-02 12:08:22 -08:00
9fdca9e29f
Remove the extra scaling on W for UHJ encoding
...
There seems to be some inconsistent info about whether W should be scaled by
sqrt(2) for encoding. Not applying the scaling results in a wider stereo image,
which seems more appropriate.
2016-03-01 15:48:23 -08:00
c89511b95e
Properly remove empty config values
2016-02-28 21:55:58 -08:00
abf6a9260a
Add an option to select between UHJ and pair-wise mixing.
2016-02-28 20:55:41 -08:00
81384949e2
Properly check for preexisting HRTF names
2016-02-28 18:30:12 -08:00
9e3a1942a3
Add an ALSA backend tab
2016-02-28 09:27:52 -08:00
11acbfebf7
Hide backend list items for backends that aren't available
2016-02-27 22:12:53 -08:00
Chris Robinson